then 'Add to home screen'
then 'Add to home screen'
Features & Benefits
Works two ways
The COACh V works through an RS232-style serial interface or via USB with auto-detection. If configured for USB operation the COACh V is classified as self powered.
Fully Optimized
Regardless of the configuration, operation is automatically detected on power up and needs no user intervention. The COACh V fully supports the Elo SmartSet protocol and all program drivers, both serial and USB.
Additional Features
- On-board calibration, coordinate scaling, and programmable output rates allow for application-specific performance tuning
- Improved measurement algorithm eliminates the need for touch filter adjustments
- Multiple output formats: Binary or ASCII
- Conversion time approximately 10 ms per coordinate set
- Full AccuTouch SmartSet protocol
- E261-280, E271-140, E281A-4002 compatibility modes
Specifications
| Part Number(s) | E196429 |
| Technology | 5-Wire Resistive (AccuTouch®) |
| Number of Touches | Single Touch |
| Input Methods | Finger Gloved hand Passive stylus |
| Dimensions | 7 mm x 7 mm x 1.6 mm |
| Surface Treatment | Clear |
| Input Voltage | 5V +/- 10% |
| Report Rate | 10ms |
| Baud Rate | For RS232: 9600 (default) and 19200 |
| Operating Temperature | -40°C to 85°C |
| Storage Temperature | -65°C to 125°C |
| Humidity | 10% o 90% RH, noncondensing |
| Warranty | 2-year |
| Controller Cables | Serial cable: P/N D16890-000 USB cable: P/N D38640-000 Dual serial/USB cable: P/N D40022-000 |
